One Stop Systems
ExpressBox 3200 |
77
8.2
Daisy-Chaining
Recognizing the typical insignificance of the performance variance between the “Fan-Out” and “Daisy-Chaining” configurations, the primary
reason for using this one would be limitations on physical space. This could be the number of available slots on the computer motherboard, or a
lack of desk or rack space.
In the daisy-chain configuration, successive PCIe expansion systems are added to the "end" of the PCI bus hierarchy, which adds "depth" to the
PCI/PCIe Local Bus by increasing the number of PCI Local Bus levels active in the system configuration.
Set up
1.
Set the Interface card to “Host” mode. Check the SW4 switch. Move the switch to “OFF-Host” position.
2.
Install the Interface card in the Expansion unit, use available PCIe slot.
3.
Connect OSS cables.
4.
Connect power cords. Turn power supply with to “ON” position
5.
Power UP the computer
6.
All expansion units should power up automatically.
Summary of Contents for EB3200
Page 1: ...ExpressBox 3200 PCIe to PCIe Expansion User Manual SKU EB3200 www onestopsystems com...
Page 13: ...One Stop Systems ExpressBox 3200 1 Introduction ExpressBox 3200 13 1 8 Parts Overview...
Page 31: ...One Stop Systems ExpressBox 3200 2 Hardware Installation 31 2 8 2 Clamp Position Orientation...
Page 85: ...Manual P N 09 09959 03 Rev A...
