![background image](http://html1.mh-extra.com/html/one-stop-systems/eb3200/eb3200_user-manual_1635032069.webp)
One Stop Systems
ExpressBox 3200 | 6 Troubleshooting
69
Q: My host computer is having problem linking up to the expansion chassis. I have both Interface cards installed and seated firmly in their
corresponding slot; one is installed in the host computer PCIe slot and the other one in the expansion PCIe slot. Is there something wrong
with the Interface card?
A:
When using the 01-08003-00, which comes in a pair, one should be set to OFF-host and the other is set to ON-Exp.
1.
There is a red dipswitch on the Interface card that must be set correctly in order to work. The red dip switch is labeled SW4.
2.
01-08003-00, SW4 when set to ON=EXP should be installed only inside the OSS expansion unit.
3.
01-08003-00, SW4 when set to OFF=HOST should be installed inside the host computer.
4.
If the 01-08003-00 cards are not set properly according to their corresponding mode your computer will not link up with the
OSS expansion unit.
See pictures below for correct mode setting.
Summary of Contents for EB3200
Page 1: ...ExpressBox 3200 PCIe to PCIe Expansion User Manual SKU EB3200 www onestopsystems com...
Page 13: ...One Stop Systems ExpressBox 3200 1 Introduction ExpressBox 3200 13 1 8 Parts Overview...
Page 31: ...One Stop Systems ExpressBox 3200 2 Hardware Installation 31 2 8 2 Clamp Position Orientation...
Page 85: ...Manual P N 09 09959 03 Rev A...