One Stop Systems
ExpressBox 3200 | 2 Hardware Installation
16
2.4
Install Expansion Interface card
By default, the Expansion Interface card is already installed. No need to install the Expansion Interface card.
If you need to install the Expansion Interface card, follow these steps below:
1.
Remove the slot cover
2.
Plug-in the Expansion Interface card into PCIe slot
labeled #3
. This is the designated slot for the Expansion interface card. Installing
the interface card into a non-designated slot will cause the system to malfunction.
Make sure to check that the dipswitch (SW4) is set to proper mode. It should be set to “ON=EXP” position, see picture below.
Summary of Contents for EB3200
Page 1: ...ExpressBox 3200 PCIe to PCIe Expansion User Manual SKU EB3200 www onestopsystems com...
Page 13: ...One Stop Systems ExpressBox 3200 1 Introduction ExpressBox 3200 13 1 8 Parts Overview...
Page 31: ...One Stop Systems ExpressBox 3200 2 Hardware Installation 31 2 8 2 Clamp Position Orientation...
Page 85: ...Manual P N 09 09959 03 Rev A...
