Omron SYSMAC 3G8F7-CLK12-E, Operation Manual

Page: 99 / 166

6-3 Section Commands and Responses for the Support Board
83
6-3 Commands and Responses for the Support Board
6-3-1 Command Codes
Command
code
Data link operation
mode
Name Page
code
Active Inactive
04 01 Not valid Valid DATA LINK START 83
02 Valid Not valid DATA LINK STOP 84
05 01 Valid Valid CONTROLLER DATA READ 84
06 01 Valid Valid CONTROLLER STATUS READ 85
02 Valid Valid NETWORK STATUS READ 87
03 Valid Valid DATA LINK STATUS READ 89
04 Valid Valid CONNECTION CONFIGURATION INFORMATION
READ 90 (See note.)
05 Valid Valid NETWORK DISCONNECTION INFORMATION READ 91 (See note.)
06 Valid Valid NETWORK DISCONNECTION INFORMATION
CLEAR 93 (See note.)
08
01 Valid Valid ECHOBACK TEST 94
02 Valid Valid BROADCAST TEST RESULTS READ 94
03 Valid Valid BROADCAST TEST DATA SEND 95
21 02 Valid Valid ERROR LOG READ 95
03 Valid Valid ERROR LOG CLEAR 96
Note Command codes 06 04, 06 05, and 06 06 are supported only by the Optical Ring
Controller Link Support Boards in Token Ring Mode.
6-3-2 DATA LINK START
Starts the Controller Link Network data links.
Command Block
01 04
Command
code
Response Block
01 04
Response
code
Command
code
The DATA LINK START command can be received for manually set data links.
An error will occur if manually set data links are specified and yet data link tables
do not exist.
The node that receives this command and starts the data links will become the
data link startup node.
Note The Support Board can participate in automatically set data links, but it cannot
be the starting unit.