!
!
!
!
3
Safety Precautions
xii
1
Intended Audience
This manual is intended for the following personnel, who must also have knowl-
edge of electrical systems (an electrical engineer or the equivalent).
•
Personnel in charge of installing FA systems.
•
Personnel in charge of designing FA systems.
•
Personnel in charge of managing FA systems and facilities.
2
General Precautions
The user must operate the product according to the performance specifications
described in the operation manuals.
Before using the product under conditions which are not described in the manual
or applying the product to nuclear control systems, railroad systems, aviation
systems, vehicles, combustion systems, medical equipment, amusement ma-
chines, safety equipment, and other systems, machines, and equipment that
may have a serious influence on lives and property if used improperly, consult
your OMRON representative.
Make sure that the ratings and performance characteristics of the product are
sufficient for the systems, machines, and equipment, and be sure to provide the
systems, machines, and equipment with double safety mechanisms.
This manual provides information for programming and operating the Controller
Link Support Board for PCI Bus and related devices. Be sure to read this manual
before attempting to use the software and keep this manual close at hand for
reference during operation.
WARNING
It is extremely important that a Controller Link Support Board for PCI Bus and all
related devices be used for the specified purpose and under the specified
conditions, especially in applications that can directly or indirectly affect human
life. You must consult with your OMRON representative before applying a
Controller Link Support Board for PCI Bus to the above mentioned applications.
3
Safety Precautions
WARNING
Never attempt to disassemble any Controller Link Support Board for PCI Bus
while power is being supplied. Doing so may result in serious electrical shock or
electrocution.
WARNING
Never touch any of the terminals while power is being supplied. Doing so may
result in serious electrical shock or electrocution.
WARNING
Provide safety measures in external circuits, i.e., not in the Programmable
Controller (CPU Unit including associated Units; referred to as “PC”), in order to
ensure safety in the system if an abnormality occurs due to malfunction of the PC
or another external factor affecting the PC operation. Not doing so may result in
serious accidents.
•
Emergency stop circuits, interlock circuits, limit circuits, and similar safety
measures must be provided in external control circuits.
•
The PC will turn OFF all outputs when its self-diagnosis function detects any
error or when a severe failure alarm (FALS) instruction is executed. As a coun-
termeasure for such errors, external safety measures must be provided to en-
sure safety in the system.
