manualshive.com logo in svg

Omron SYSMAC 3G8F7-CLK12-E, Operation Manual

Share
Download
Omron SYSMAC 3G8F7-CLK12-E Operation Manual Download Page 23

1-1

Section

Overview

7

1-1-3 What Is a Controller Link Support Board?

A Controller Link Support Board is used to directly connect an IBM PC/AT or
compatible with an ICA or PCI bus to a Controller Link Network. A Controller Link
Support Board supports data links, a message service, and RAS functions in the
same way as a Controller Link Unit.

The Support Board is mounted in an expansion slot in the computer. The follow-
ing Support Boards are available depending on the type of connection cable.

Wired System

Controller Link Network

3G8F7-CLK21-E (for PCI Bus) or
3G8F5-CLK21-E (for ISA Bus)
 Controller Link Support Board

Controller Link Unit

PC

IBM PC/AT or
compatible

Optical System/Optical Ring System (H-PCF Cable)

Optical System/Optical Ring System (H-PCF Cable) Controller Link Network

3G8F7-CLK12-E (for PCI Bus) or
3G8F5-CLK11-E (for ISA Bus
 Controller Link Support Board

Controller Link Unit

PC

IBM PC/AT or
compatible

Optical Ring System (GI Cable)

Controller Link Unit

PC

3G8F7-CLK52-E (for PCI Bus)
Controller Link Support Board
(ISA Bus is not available.)

Optical Ring System (GI Cable) Controller Link Network

IBM PC/AT or
compatible

Summary of Contents for SYSMAC 3G8F7-CLK12-E







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands