Section
9-5
Handling Precautions
141
a) Click the Basic Tab in the FinsGateway Settings.
b) Click the Services Icon.
c) Select CLK (PCI) and click the Start Button.
8. Using the CLK Data Link Setting Utility in the FinsGateway or the Controller
Link Support Software, read the network parameters and make sure the
Network is operating normally.
9. Using the CLK Data Link Setting Utility in the FinsGateway or the Controller
Link Support Software, register data link tables and routing tables in the new
Board.
10. Change the Board to the polling node from the FinsGateway Settings, re-
versing the procedure in step 6., above. The RUN and INS indicators should
light on the Board. The LNK indicator may also light.
11. Check that the data links are operating normally by using the CLK Data Link
Setting Utility in the FinsGateway or the Controller Link Support Software
Note The following procedure can be used to start the CLK Data Link Setting Utility in
FinsGateway.
1, 2, 3...
1. Click the Basic Tab in the FinsGateway Settings.
2. Click the Networks Icon.
3. Select the desired Board and click the Properties Button.
4. Click the Data Links Tab.
5. Click the Set Data Links Tab.
Refer to FinsGateway online help for details.
