vii
F3SJ-A
User’s Manual
Int
ro
ductio
n
E
Double or reinforced insulation from hazardous voltage must be applied to all input and output lines. Failure to
do so may result in electric shock.
Extension of the cable must be within a specified length. If it isn't, safety function may not work properly,
resulting in danger.
Other
To use the F3SJ in PSDI mode (Reinitiation of cyclic operation by the protective equipment), you must
configure an appropriate circuit between the F3SJ and the machine. For details about PSDI, refer to
OSHA1910.217, IEC61496-1, and other relevant standards and regulations.
Do not try to disassemble, repair, or modify this product. Doing so may cause the safety functions to stop
working properly.
Do not use the F3SJ in environments where flammable or explosive gases are present. Doing so may result in
explosion.
Perform daily and 6-month inspections for the F3SJ. Otherwise, the system may fail to work properly, resulting
in serious injury.
Courtesy
of
CMA/Flodyne/Hydradyne
▪
Motion
Control
▪
Hydraulic
▪
Pneumatic
▪
Electrical
▪
Mechanical
▪
(800)
426-5480
▪
www.cmafh.com
