189
F3SJ-A
User’s Manual
Chapter
7
Tro
ubles
hoot
in
g
Appendix
E
40
Setting value error Function setting value configured
by the setting tool is out of valid
range.
Perform setting recovery to
restore factory settings.
Muting enabling keycap is
attached but muting/override
information is not assigned to
either of auxiliary output 1,
external indicator output 1 or 2.
To use muting function, muting/
override information must be
assigned to at least one of
auxiliary output 1, external
indicator output 1 or 2.
4E
Cap position error Failure of F3SJ's internal circuit.
Replace the F3SJ.
4F
Cap error
Cap is not attached.
Attach the cap properly.
A contact failure due to the loose
cap, the intrusion of liquid (oil etc.)
into the cap, or the attachment of
a foreign material has occurred.
After cleaning the inside of the
cap (if any foreign material is
attached), tighten the cap more
closely. Replace the cap if any
liquid such as oil has intruded.
50, 51, 52, 53 External device
monitoring error
Relay is welded.
Replace the relay.
The relay and external device
monitoring input line are not
properly wired.
Check the wiring for the relay.
The relay response time exceeds
the allowable delay time.
Replace the relay with one that
has an appropriate response time.
Or, change the device monitoring
time by the setting tool.
If short-circuit is made to an
auxiliary output instead of a relay,
the auxiliary output line is broken
or short-circuited.
Make sure there is no failure in
the external device monitoring
input and auxiliary output lines.
Or, use the setting tool to set
output mode of auxiliary output 1
to safety output information and
enable reverse output mode.
(factory shipment setting).
Emitter(s) and receiver(s) are
reversely connected when
connected to connector type
controller.
(Connectors of F3SP-B1P's
emitter/receiver are reversely
attached, etc.)
Check connectors' positions.
Emitter Receiver
Error code
Error Description
Cause
Solution
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
Courtesy
of
CMA/Flodyne/Hydradyne
▪
Motion
Control
▪
Hydraulic
▪
Pneumatic
▪
Electrical
▪
Mechanical
▪
(800)
426-5480
▪
www.cmafh.com
