86
Ch
apt
e
r
3
Set
ting Adjust
ed
to Appl
ication
F3SJ-A
User’s Manual
What can be done by the setting tool
Also, muting sensors and F3SJ must be installed so that muting state caused by a workpiece should
be ended before the next workpiece arrives at the first muting sensor.
Timing Chart
*1 The value is applied to a single sensor. Values for connected sensors are:
•T1min: Muting input time limit value (minimum)
Minimum time difference between muting inputs 1 and 2.
If the time difference between muting inputs 1 and 2 is smaller than this value, a muting error occurs.
•T1max: Muting input time limit value (maximum)
Maximum time difference between muting inputs 1 and 2.
Minimum value must be less than maximum value.
•T2: Muting time limit
Time to be continued for muting function. If muting state exceeds this time, the function is canceled.
•T3: Maximum muting input time with allowable waveform cracks
# of connections
*1 Value (s)
Single
0.15
2 connected
0.26
3 connected
0.29
4 connected
0.32
Workpiece
Workpiece
Workpiece
Workpiece
F3SJ
A1 B1
F3SJ
A1 B1
Hazardous zone
Hazardous zone
d2
d1
d2
d1
Moving direction
Moving direction
T2 max.
0.15s max. *1
T5 max.
Muting input 1
(Muting sensor A1)
ON
OFF
Muting input 2
(Muting sensor B1)
F3SJ Unblocked
/Blocked
Unblocked
Blocked
Safety output
ON
OFF
ON
OFF
Muting state
Enabled
Disabled
Muting lamp
Blinking
OFF
T1max
T4 (0.1s)
T1min to T1max
T3 (0.1s) max.
T3(0.1s) max.
Courtesy
of
CMA/Flodyne/Hydradyne
▪
Motion
Control
▪
Hydraulic
▪
Pneumatic
▪
Electrical
▪
Mechanical
▪
(800)
426-5480
▪
www.cmafh.com