![background image](http://html1.mh-extra.com/html/omron/sc20g2/sc20g2_operation-manual_742413009.webp)
The detail description of a screen
[
Output Parameters
]
1.
Output Source
The source of output power is displayed in the following state. [on
line], [bypass], [battery],[no output]
2.
Output Frequency
The present output frequency is displayed.
3.
Output Voltage
The present output voltage is displayed.
4.
Output Load
The connected-load capacity of the present uninterruptible power
supply (UPS) is displayed by “%”.
[
Input Parameters
]
1.
Input Voltage
The present input voltage is displayed.
2.
Max.Input Voltage Last 1 minute
The maximum input voltage for 1 minute to this time is
displayed.
3.
Min.Input Voltage Last 1 minute
The minimum input voltage for 1 minute to this time is
displayed.
4.
Input Frequency
The present input frequency is displayed.
[
Battery Parameters
]
1.
Battery Status
The state of a battery is displayed by the following contents.
[ Normal],[Battery Low],[Discharging],[Battery aging],[Not
Connected]
2.
Time since on Battery Power
The time which is operating by battery power is displayed.
3.
Battery Capacity Remaining
The remaining battery capacity of the present to a full charge
state is displayed.
4.
Current Battery Voltage
The voltage of the present battery is displayed.
5.
UPS Temperature(
℃
)
The temperature inside an uninterruptible power supply (UPS)
is displayed.
6.
Battery Last Replaced Date
It is the date which started (exchange) to use the battery of the
uninterruptible power supply (UPS). When battery exchange is
newly performed, please reset up on a [SNMP/Web card
management]-[SNMP/Web card configuration] screen.
7