![background image](http://html1.mh-extra.com/html/omron/sc20g2/sc20g2_operation-manual_742413024.webp)
Firs
t
w
arnin
g
t
ime
Warnin
g
i
nterval
Warnin
g
i
nterval
・・・
・
[AC Restore/ AC Reboot]
It reboots, when a power supply is restored, after the input power source of an
uninterruptible power supply will be failed and it will stop, if set up enabled. When you
hold a power supply OFF state then, please set up invalid. It may be unable to change
depending on a model.
・
[Renewal of UPS restart condition after AC recover]
It is specified whether UPS reboot conditions can be renewed or not.
・
[UPS restart condition]
Battery capacity and UPS initiation delay time are specified.
・
[Battery Level (%)]
Required charging capacity is set up at a start-up. When the power down occurred
immediately after, unless there is sufficient capacity for a shutdown, since it is
dangerous, it does not start, unless charge is completed to specification capacity.
・
[Output Start Delay Time of UPS Boot Up]
Please set up time until the outlet output from the power-on of an uninterruptible power
supply (UPS).
Operation in a client shutdown / uninterruptible power supply (UPS) stop
UPS ON
UPS OFF
Warning Warning Warning
sending
sending
sending
Warning time
UPS stop
Event occurred
Shutdown
command
sending
UPS stop
22