・
[Shutdown Event]
The classification of an event is displayed.
The detail description of a [Shutdown Event]
1.
AC Failed
They are the abnormalities of the input power source
represented by power failure.
2.
Battery Low
It is the charge capacity decreasing of the battery.
3.
UPS Overload
The capacity of connection apparatus exceeds the connection
capacity maximum of a [UPS management] - [UPS
configuration] page.
4.
UPS Over Temperature
It is a case where the internal temperature of an uninterruptible
power supply (UPS) exceeds the operative temperature
maximum of a [UPS management]-[UPS configuration] page.
5.
Weekly Schedule
It is a schedule in a week.
6.
Special Day
It is a schedule of a special day.
・
Shutdown Actions
The operation at the time of each event occurring is displayed and set up.
A detail description of [Shutdown Actions]
1.
Disabled
Nothing operates.
2.
Warning
A warning message is transmitted to a client.
A shutdown, a stop, etc. are not performed.
3.
Client Shutdown
A shutdown command is sent out to a client computer.
A stop of an uninterruptible power supply (UPS) is not
performed.
4.
UPS Turn Off
An uninterruptible power supply (UPS) stop is performed
after a client shutdown.
・
[Warning Period]
The waiting time after event generating is set up. Warning is issued to a client by set up
during this time. It goes into shutdown operation by setup after waiting time.
・
[1st Warning]
It set the time until sending the first warning after an event has occurred.
・
[Warning Interval]
The sending interval of warning is set up. The minimum is 3.
・
[UPS Shutdown Delay Time]
It is the time to the stop of an uninterruptible power supply (UPS) after warning period
elapsed. Please set up sufficiently the time for client shutdown
21
