![background image](http://html1.mh-extra.com/html/omron/sc20g2/sc20g2_operation-manual_742413035.webp)
The detail description of a screen
1.
SNMP/Web Card MAC Address
The Mac address of a SNMP/Web card is displayed and set up.
2.
SNMP/Web Card IP Address
The IP address of a SNMP/Web card is displayed and set
up. (Input example: 192.168.2.150)
3.
SNMP/Web Card Gateway Address
A gateway address is displayed and set up.
(Input example: 192.168.2.1)
4.
SNMP/Web Card Subnet Mask
A subnet mask is displayed and set up. (Input example:
255.255.255.0)
5.
System Name
"System Name" specified to MIB-II is displayed. Please set if
necessary.
6.
System Contact
"System Contact" specified to MIB-II is displayed. Please set
if necessary.
7.
System Location
"System Location" specified to MIB-II is displayed. Please set
if necessary.
8.
Battery Last Replaced Date
The date the beginning of use(exchange) the battery in
uninterruptible power supply (UPS). Please re-set when you
make a new battery replacement.
9.
History Log Interval
This is the time interval to record log(data log) of output
voltage, connected load, such as a battery capacity. The
minimum value is 5 seconds.
10.
Extended Log Interval
It is a unit of time to get the extended data log. Extended data
log will record minimum, maximum, and average values within a
fixed time.
11.
SNMP/Web Card Polling Rate
It is the interval to update the parameters by which SNMP /
Web card performs communication with the uninterruptible
power supply (UPS).
33