The detail description of a screen
1.
IP Address
The IP address of the apparatus linked to UPS is inputted.
2.
Load Device
The arbitrary character strings which identify and explain the
apparatus linked to UPS are inputted.
3.
Device Shutdown Action
When an error occurs in the response of Ping, it is set up
individually whether script shutdown operation is performed to
apparatus.
4.
Fail Number of Ping Monitoring
It will be set up whether it is judged that a system has
abnormalities when how many sets among the apparatus
connected occurs the response error of Ping.
5.
UPS Action
Operation of UPS is set when abnormalities occur to Ping
monitoring. It can choose from five items of output stop, an output
stop and start, a UPS stop, a UPS stop and start, continue.
If UPS stop or UPS stop and start is chosen by the outlet A,
the outlet B and the outlet C will stop an output according to
a UPS stop.
6.
Pass Rate
Among the Ping test in which they are tried, it will specify the
number of times of response which can be judged as pass.
7.
Test Rate
The number of times of the Ping signal of how many times to
transmit to apparatus by one Ping test is specified.
8.
Interval Time
It specifies the intervals of which 1 times of a Ping signal is
transmitted. A unit is a minute.
9.
Ping Delay Time
It specifies the start delay time of ping signal after the
SNMP/Web card boot.
[Send UPS Command] Menu
・
it is used in a maintenance etc. Usually, please do not use it.
47