![background image](http://html.mh-extra.com/html/omron/nt15s/nt15s_operation-manual_744537151.webp)
137
Standard Mode
Section 4-9
for as long as the Help key is held down. If several system messages are pending at
the same time, they will be displayed in order of their system numbers, whereby the
system message number ‘1’ represents the highest display priority.
The user has the option of editing system message texts with the programming
software. The size of one screen is available for each message text. The system
message text can be freely designed using the terminal-specific font. Additional
character attributes or graphics are not possible.
The output of the texts is language-specific, i.e. if the operator guidance is multi-
lingual, the system messages are displayed in accordance with the selected lan-
guage.
System messages are assigned in the programming software via the system
message number. The system message number stands for a predefined event. A
brief info consisting of 20 characters is used to provide an explanation of the sys-
tem number. The length of the texts is designed to allow them to be displayed
directly on one line, even on the smallest display in the TesiMod operating terminal
series. When a selection is made in the programming software, the brief descrip-
tion is provided next to the number as a message name. A newly created system
contains the following system messages with brief infos:
System Message No.
Brief Info
1
Wrong format
2
Value too large
3
Value too small
4
Replace battery
5
Message overflow
6
New message
7
Message buffer full
8
Invalid mask no
9
Invalid message no
10
Print log invalid
11
Interface in use
12
Invalid password
13
Password unchanged
14
Overvoltage
15
Data set protected
16
Illegal data set
17
Data set unknown
18
Data set memory full
19
Data set active
20
Data set transfer
21
Password missing
22
Editing mode active
23
Data set file error
24
Data set format
25
(Floating point) Number invalid
26
Loop through active
27
No data set address
28
Recipe unknown
29
Data set download
Summary of Contents for NT15S
