Omron NT15S, Operation Manual

Page: 120 / 233

106
Standard Mode
Section 4-6
4.6.3.10 Password
MskchgPasswd
Is used to enter the password into a mask.
Data type: Numeric, alphanumeric
Editor: Alphanumeric
Output: ---
Possible values: 11 characters
MskchgResPasswd
Is used to erase the password currently entered; resets the access authorization.
The access levels are reset on every power-up.
Data type: Numeric
Editor: Selection text , positive decimal number, soft key,
function key
Output: ---
Possible values: (0) Initial state
(1) Reset access authorization
ChangePasswd
This system variable can be used to modify the passwords in the terminal.
Data type: Numeric, alphanumeric
Editor: Alphanumeric
Output: ---
Possible values: 11 characters
FlashPasswd
This system variable can be used to reset the passwords to the code values spec-
ified in the programming software. Useful in the case of a loss of the passwords.
Make sure to make a note of the master password first.
Data type: Numeric
Editor: Selection text , positive decimal number, soft key,
function key
Output: ---
Possible values: (0) Initial state
(1) Reset passwords
Passwdlnactive
Is used to deactivate the password protection. The system variable is battery-
backed. The most recent setting is retained when the device is turned off.
Data type: Numeric
Editor: Selection text , positive decimal number
Output: ---
Possible values: (0) Password protection active (initial state when
first initialization)
(1) Password protection inactive (edit and view
level = 255)