Omron NT15S, Operation Manual

Page: 100 / 233

86
Standard Mode
Section 4-6
UserVersion
Indicates the version number of the project description to the operator. The user
enters this number into the programming system during programming time.
Data type: Numeric
Editor: ---
Output: Numeric, 3 digits
Possible values: ---
Boot
This variable can be used to initiate the terminal to boot (system restart). The vari-
able is suitable for integrating the setup function into the regular operator guidance,
making it possible to modify terminal parameters which require a subsequent rein-
itialization (system restart) in any I/O mask. The terminal is booted if a ‘1’ is written
to this variable. Subsequently, the variable is automatically reset to ‘0’.
Data type: Numeric
Editor: Selection text , positive decimal number
Output: ---
Possible values: (0) Inactive Initial state
(1) Active System restart
LCDContrast
Is used to adjust the contrast for terminals with liquid crystal displays.
Data type: Numeric
Editor: Integer
Output: ---
Possible values: -127 to +127 (to be limited further based on terminal
type)
LCDBackground
Is used to adjust the background of the display. This variable is only relevant for
operating terminals fitted with a corresponding display.
Data type: Numeric
Editor: Selection text , positive decimal number
Output: ---
Possible values: (0) Normal representation
(1) Inverse background
LCDBackLight
Is used to adjust the background lighting of the display. This variable is only rele-
vant for operating terminals fitted with a corresponding display.
Data type: Numeric
Editor: Any
Output: ---
Possible values: (0) Background lighting OFF
(1 to x) Background lighting ON (dimmed)