Omron NT15S, Operation Manual

Page: 133 / 233

119
Standard Mode
Section 4-6
4.6.4.5 Selection Text Editor
The Selection Text Editor offers texts contained in a text list for selection. Every text
in a text list is assigned to a numerical value. In the case of input variables, the
numerical value associated with the corresponding text is written to the PLC vari-
able. For output variables, the text associated with the numerical value is displayed
on the operating terminal.
Key Functions in the Selection Text Editor
Key: Plus
Selection in ascending order (after the final value is
reached, the value at top of the text list is selected next.)
Key: Minus Selection in reversed order (after the first value is
reached, the value at the bottom of the text list is select-
ed next.)
4.6.4.6 Selection Image Editor
The Selection Image Editor offers images contained in an image list for selection. A
numerical value is assigned to every image in an image list. In the case of input
variables, the numerical value associated with the corresponding image is written
to the PLC variable. For output variables, the image associated with the numerical
value is displayed on the operating terminal.
Key Functions in the Selection Imageb Editor
Key: Plus
Selection in ascending order
Key: Minus Selection in reversed order
4.6.4.7 Table Editor
Definition of Terms:
Number of rows:
Number of rows in the table that appear on the screen.
Number of elements: Number of variables that are stored in the PLC for every
column.
Table offset: Offset of the variable represented in the first row in rela-
tion to the top of the table.
When a mask is refreshed, the table offset is always set
to 0. After paging down once, it is for example equal to
the number of rows.
The table offset is always the same for every column.
Single variable: Every variable in a mask located outside of the table.
Column variable: Every variable placed in a table creates one column.
Mask variable: Column variable or single variable.
Row variable: Every row in the column of a table contains one row
variable.
Last row variable: Row variable in the bottom row of the table with the
maximum table offset.
First row variable: Row variable in the top row of the table with a table off-
set of 0.