Omron NT15S, Operation Manual

Page: 106 / 233

92
Standard Mode
Section 4-6
Data type: Numeric
Editor: Selection text , positive decimal number
Output: ---
Possible values: (0) Inactive Initial state
(1) Active The data entered into the associated
system variables are accepted as
the new parameters.
(1) Active The data stored in the Flash memo-
ry by the programming software are
accepted as the new parameters.
4.6.3.5 Real-Time Clock
RTCSec
This variable is used to display and set the seconds of the clock.
Data type: Positive decimal number
Editor: Positive decimal number
Output: Positive decimal number
Possible values: 0 to 59
RTCMin
This variable is used to display and set the minutes of the clock.
Data type: Positive decimal number
Editor: Positive decimal number
Output: Positive decimal number
Possible values: 0 to 59
RTCHour
This variable is used to display and set the hours of the clock.
Data type: Positive decimal number
Editor: Positive decimal number
Output: Positive decimal number
Possible values: 0 to 23
RTCDay
This variable is used to display and set the day of the month.
Data type: Positive decimal number
Editor: Positive decimal number
Output: Positive decimal number
Possible values: 0 to 31 (varies from month to month, clock corrects in-
correct entries on the next change of date)
RTCMonth
This variable is used to display and set the month of the year.
Data type: Positive decimal number
Editor: Positive decimal number
Output: Positive decimal number
Possible values: 0 to 12