Omron NT15S, Operation Manual

Page: 107 / 233

93
Standard Mode
Section 4-6
RTCYear
This variable is used to display and set the year.
Data type: Positive decimal number
Editor: Positive decimal number
Output: Positive decimal number
Possible values: 0 to 99 (only the year and the decade are influenced)
RTCDayofWeek
This variable is used to display and determine the day of the week. The variable
assumes the values 0 to 6. This is a modulo counter. A coded text should be used
for the display. The assignment and starting point can be specified as needed.
Data type: Positive decimal number
Editor: Selection text
Output: Selection text
Possible values: 0 to 6
RTCDateFmt
Is used to enter the format according to which the date is to appear in displayed
messages.
Data type: Numeric
Editor: Selection text , positive decimal number
Output: ---
Possible values: (0) European DD MM YY
(1) US MM DD YY
(2) JAPAN JJ MM DD
RTCYear2000
This variable is used to display and set the year in a 4-digit format.
Data type: Numeric
Editor: Selection text , selection image, alphanumeric, deci-
mal
Output: ---
Possible values: 0 to 9999
4.6.3.6 Serial Message System
RepmanSortCrit
Is used to enter the sorting criterion for the serial message output.
Data type: Numeric
Editor: Selection text , positive decimal number
Output: ---
Possible values: (0) By priority of message number
(1) By time of arrival (newest first)
(2) By time of arrival (oldest first)