Omron E5AF, Operation Manual

Page: 34 / 82

(
For Channel no. settings, refer to
3--10 Set Value Write
.
*
00 to 99 Start
@ Controller no. R Channel no. FCS
X10
1
X10
0
Header
code.
X10
1
X10
0
If the end code is 00, operation was normal. If the end code is other than 00,
the command was not processed.
For negative data values, x10
3
becomes F (e.g. --35
A
C = F035). The output
value is processed down to the first decimal place (e.g. 0567 = 56.7%). For
details refer to
3--16 Auto-tuning Start
.
00 to 99 Start
*
@ Controller no. R End code Set Value FCS
X10
1
X10
0
Header
code
X16
1
X16
0
X10
3
X10
2
X10
1
X10
1
3--12 Set Limit Read
The upper or lower limit of the set value can be read. If a temperature ex-
ceeding the range of the set limit is written, end code 15 (register error) will
result. Use the Setting Limits command to check the setting range.
Start 00 to 99 Channel no.
*
@ Controller no. R L 0 1 FCS
X10
1
X10
0
Header
code
X10
1
X10
0
For negative data values, x10
3
becomes F (e.g. --35
A
C = F035).
Any data read will not include decimals. Refer to the following examples:
For a Pt 100
0
input (--99.9
A
to 450.0
A
C), the lower limit is F999 and the
upper limit is 4500.
For a K thermocouple input (--200 to 1,300
A
C), the lower limit is F200 and
the upper limit is 1300.
00 to 99
@ Controller no. R L End code Set value lower limit
X10
1
X10
0
Header
code
X16
1
X16
0
X10
1
X10
0
X10
3
X10
2
Set value upper limit FCS
X10
1
X10
0
X10
3
X10
2
*
Command Format
Response Format
Command Format
Response Format
#
Section NO TAG