Omron E5AF, Operation Manual

Page: 53 / 82

'-
Status (1)
Data select code [3A]
Input shift input ON (See Note 1)
Alarm 1 output relay ON (See Note 2)
Alarm 2 output relay ON (See Note 2)
Auto-tuning being carried out
2
3
2
2
2
1
2
0
Note 1. The input shift bit of E5AF-AH
=
will be 0.
2. Alarm output 1 bit of the E5AF-AH
=
is the alarm bit. Alarm output 2 bit is
for the detection of an abnormal input and heater burnout.
Status (2)
Data select code [3B]
2
3
2
2
X 2
0
Temperature scale F C . . . . . .
PID constant display Yes No . . . .
Output type Current Pulse . . . . . . . . . . . .
“1” “0”
Status (3)
Data select code [3C]
Control mode* ON/OFF PID with feed-forward circuitry . . . . . . . . .
Output operation Normal Reversed . . . . . . .
Input shift value display Yes No .
X 2
2
2
1
2
0
“1” “0”
Alarm Model (1)
Data Select Code [3D]
For the E5AF-A
=
, this code indicates the Model of alarm output 1. The re-
sponses are shown in response 0 to 9 of Alarm Model (1).
Response Model Description
0 Alarm No alarm
1
Upper/lower limit alarm
2 Upper limit alarm
3 Lower limit alarm
4 Upper/lower limit range alarm
5 Upper/lower limit alarm with stand-by sequence
6 Upper limit alarm with stand-by sequence
7 Lower limit alarm with stand-by sequence
8 Absolute value alarm
9 Proportional alarm
Alarm Model (2)
Data Select Code [3E]
For the E5AF-A
=
, this code indicates the Model of alarm output 2. The re-
sponses are shown in response 0 to 8 of Alarm Model (1).
3. Status
'
Section 4--5