Omron E5AF, Operation Manual

Page: 41 / 82

!
3--19 End Code List
End code Contents
x 16
1
x 16
0
0 0 Normal ending (when there is no error in the command block sent from the host computer)
0 1 ------
0 2 ------
0 3 ------
0 4 ------
0 B ------
0 C ------
0 D Command cannot be executed
1 0 Parity error (even)
1 1 Framing error
1 2 Overrun error
1 3 FCS error
1 4 Format error
1 5 Data error
1 6 ------
1 8 ------
1 9 ------
2 1 Non-volatile memory write error (see note)
Note This end code is available when using the E5EF.
Error Criteria
End code Contents Condition
0D Local mode When a write command is sent while the Fuzzy Temperature Controller is in its
local mode or performing auot-tuning.
10 Parity error (even) When the sum of “1” bits in the received data do not agree with the even or
odd parity that has been set.
11 Framing error When the stop bit is 0.
12 Overrun error When the receive data register is full and new receive data is transferred to it.
13 FCS error When the FCS shows disagreement.
14 Format error When the total length of the command is incorrect.
15 Data error When there is a setting error in write data.
When a Channel number is invalid.
When the write data is not acknowledged as numeric values.
E5AF:
Wrong Controller number > Undefined > Local mode > Parity > Framing >
Overrun > FSC error > Format > Register data
E5EF:
Undefined > Command execution impossible > Parity > Framing > Overrun >
Format > FCS error > Non-volatile memory > Data
Order of Priority
Section 3--19