Omron E5AF, Operation Manual

Page: 37 / 82

!
00 to 99 Start
@ Controller no. R Z End code CT input value
X10
1
X10
0
Header
code
X16
1
X16
0
X10
1
X10
0
X10
3
X10
2
Status data FCS
X16
1
X16
0
X16
3
X16
2
*
2
3
2
2
2
1
2
0
2
3
2
2
2
1
2
0
Status Data
X16
3
X16
2
X16
1
X16
0
*1 Overflow
*2 Display hold
*1: If the heater current exceeds 50.0 A, 1 will be set, at which time 50.0 will be read as an heater current value.
*2: If the control output is ON for less than 200 ms, 1 will be set and the present value will be maintained as a heater current value.
3--15 Initial Status Read
This command is used to check the initial status of the internal settings of the
E5AF/E5EF.
Start 00 to 99 Channel no.
*
Terminator
@ Controller no. R U 0 1 FCS
X10
1
X10
0
Header
code
X10
1
X10
0
00 to 99 (1)*
@ Controller no. R U End code Status ALM1 ALM2 FCS
X10
1
X10
0
Header
code
X16
1
X16
0
X10
3
X10
2
Start
*
(2)* (2)* (3)*
Input
type
*: refer to the following subsections within this response format section.
Response Format
Command Format
Response Format
Section 3--15