Omron E5AF, Operation Manual

Page: 46 / 82

'3
, =:!5=) =C9"3A@C* E(. .
0 ! =-/ = 3A" AF:$
AF : $
31"
3--21--2 Operation Example
The following is an execution example of the previous program:
Bold characters represents operation and the carriage return symbol rep-
resents the RETURN key. This program cannot execute transmission normal-
ly unless the initial transmission settings of the personal computer are: even
parity, 7 bits, 2 stop bits, and the same baud rate as the E5AF. If the connec-
tors are not properly connected, the program may stop halfway.
The host computer is a PC-9801.
RUN
SEND DATA :
RESPONSE : @00RU000000077
*
(If only the RETURN key is pressed when inputting data,
the RU command is transmitted to Controller no. 00.)
RUN
SEND DATA : @00RX01
RESPONSE : @00RX000085000047
*
(The process temperature of Controller no. 00 is read.)
RUN
SEND DATA : @00WS011234
RESPONSE : @00WS0044
*
(1234 is written as the set value for Controller no. 00.)
RUN
SEND DATA : @00RS01
RESPONSE : @00RS00123445
*
(The main setting of Controller no. 00 is read.)
RUN
SEND DATA : @00AS01
RESPONSE : @00AS0D26 (Final Response)
*
TRY 1=>NO RESPONSE
TRY 2=>FCS ERROR
TRY 10=>END CODE:0D (Data Error)
The meaning of response is as follows:
@00RX 00 0085 0000 47
FCS
Status data
End code (Normal)
Process temperature 85
*
&
Section 3--21