![background image](http://html.mh-extra.com/html/omron/cp1e-e-d-series/cp1e-e-d-series_user-manual_742511121.webp)
5-3
5 Installation and Wiring
CP1E CPU Unit Hardware User’s Manual(W479)
5-2 In
stallat
ion
5
5-
2-1 Installat
ion Lo
cation
5-2
Installation
This section describes the environmental factors that must be considered and the installation location
of each Unit.
Do not install the Unit in the following locations.
•
Locations subject to ambient temperatures lower than 0ºC or higher than 55ºC.
•
Locations subject to drastic temperature changes or condensation.
•
Locations subject to ambient humidity lower than 10% or higher than 90%.
•
Locations subject to corrosive or flammable gases.
•
Locations subject to excessive dust, salt, or metal filings.
•
Locations that would subject the PLC to direct shock or vibration.
•
Locations exposed to direct sunlight.
•
Locations that would subject the PLC to water, oil, or chemical reagents.
Always enclose or protect the PLC sufficiently in the following locations.
•
Locations subject to static electricity or other forms of noise.
•
Locations subject to strong electromagnetic fields.
•
Locations subject to possible exposure to radioactivity.
•
Locations close to power lines.
When the CP1E is being installed in a cabinet or control panel, be sure to provide proper ambient con-
ditions as well as access for operation and maintenance.
Installation Orientation
When installing the CP1E in a control panel, it must be installed with the side with indicators and
communications ports facing the front to ensure proper heat dissipation.
5-2-1
Installation Location
Installation Environment
Installation in Cabinets or Control Panels
OK
Summary of Contents for CP1E-E**D Series
