Omron BN100T, Instruction Manual, Page: 51 / 110

3 Check and start operation
3-4 Operation from the LCD menu
BN50T/BN75T/BN100T/BN150T/BN220T/BN300T
3-14

Basic operations on the menu screen
Switch Description
[  ] [

] Move cursor up/down or increase/decrease values
Select the menu item or set the value
Return to menu or cancel
3 Check and start operation
3-4 Operation from the LCD menu
BN50T/BN75T/BN100T/BN150T/BN220T/BN300T
3-15
3
3-4-2 The menu list of LCD
 Display language can be selected from Japanese (default) or English.
 The menu displayed changes with menu type setup. There are a Standard type and an
Advanced type. A Standard type (default) is for general purpose.
An Advanced type is for administrators.
Additional Information
• If you want to display the LCD in English, set the “Settings” - “Local Setting” -
“Language” setting in the menu on the unit’s LCD.
• If you want to display the LCD in Advanced menu type, set the “Setting” - “Local
Setting” - “Menu Type” setting in the menu on the unit’s LCD.
*: Displayed only when the UPS is stopped. (Not displayed during operation.)
Menu Description Contents
Menu
type
Meas-
urements
Load Meter Display the applied load in VA
and W.
Load Meter:
0 to xxxx W
0 to xxxx VA
Standard
Input/Output Meter Display the input/output voltage
and frequency.
Input/Output Meter:
Input: 0 to xxx.x V, 0 to xx.x Hz
Output: 0 to xxx.x V, 0 to xx.x Hz
Battery Meter Display the status of the built-in
battery.
Battery Meter:
Charge Rate: 0 to 100%
Voltage: 0.0 to xxx.xV
Runtime: 0.0 to xxx min
Longevity
Display the estimated lifespan
of the UPS in 5 levels.
Longevity:
UPS: display with a five-level indicator
Battery: display with a five-level
indicator
Cumulat. Power Usage Display the amount of power
used so far and the number of
days elapsed.
Cumulat. Power Usage:
Total: 0 to xxxx kWh
Period: 0 to xxxx days
Advanced
Average Power Usage Display the average amount of
power used so far.
Average Power Usage:
0 to xxxx Wh
Control Start Function Test Perform a self-diagnosis and a
test to check for battery deteri-
oration, and then display the
results.
Start Function Test
·
Passed Battery OK
·
Failed No Battery
·
Failed Battery Weak
·
Canceled UPS is on Battery mode
·
Canceled B.capacity is not enough
Standard
Reset B.life counter Reset the battery life counter. Reset B.life ctr:
Are you sure?  Yes or No
Load Segments Control the ON/OFF of output
receptacle group B and C.
Load Segments
Out B: ON/OFF
Out C: ON/OFF
Advanced
Reset Power Usage Reset the values of cumulative
power usage and average
power usage.
Reset power usage
Are you sure?  Yes or No
Dry Contact Test * Perform a contact test when
using a contact signal card
(SC07/SC08).
Dry Contact Test
BU: ON/OFF
BL: ON/OFF
TR: ON/OFF
WB: ON/OFF
Initialization * Return each of the UPS set-
tings to the factory settings.
Restore F.setting
Are you sure?  Yes or No
Maintenance Bypass Move to Bypass Mode forcibly. Maintenance Byp.
Are you sure?  Yes or No
Setting Local
Setting
Language Set the language to be dis-
played on the LCD.
Language:
Japanese (Default),
English
Standard
LCD Setting Change the contrast of the
LCD.
LCD Setting:
Contrast bar