Omron BN100T, Instruction Manual, Page: 28 / 110

2 Installation and connection
2-2 Connecting the equipment
BN50T/BN75T/BN100T/BN150T/BN220T/BN300T
2-4
2
. Connect devices you want to back up to the Power Supply Output Receptacles of the UPS.

If you need more output receptacles than those of the UPS, purchase a plug strip
and use it for extra output receptacles.
BN220T/BN300T
Computer peripheral devices
BN100T/BN150T
Computer peripheral devices
External HDD
Computer peripheral devices External HDD
BN50T/BN75T
External HDD
BN50T
入力サージ
保護
GND
BN100T
入力サージ
保護
GND
BN220T
Use Copper Conductor Onl y.
Refer to the instruction manual
for the tightening torque.
入力サージ
保護 GND
 When the connected device has a 2-pin AC input plug, it can be connected directly
to the power supply output receptacle. When using a 2-pin input plug with a
grounding wire, connect the grounding wire to earth in building.
 When you want to use an AC adaptor, connect it to a Power Supply Output Re-
ceptacle of the UPS with space enough for the connection.
Plug of connected device
Plug of connected device
Plug of connected device
Connect the plug directly.
Connect the grounding wire to the
earth terminal of the UPS.
Connect the grounding wire of
connect devices to earth of the
UPS.
Connect it directly. Connect it directly.
3
. When using the included UPS monitoring software, the Windows standard UPS service,
or the contact signal, use the connection cable to connect the unit to the PC.
See also "5. To perform shutdown processing of the devices such as your PC when a
power failure occurs", and "6. Using contact signal"
Note: If you do not use the UPS monitoring software and Contact Signal, this step is not required.