
2 Installation and connection
2-3 Connecting the AC input
BN50T/BN75T/BN100T/BN150T/BN220T/BN300T
2-10
4
. Connect the new AC input cable to AC input terminals by screws.
Be careful to polarities of L, N, and G terminals and connect correctly.
BN220T
Use Copper Conductor Onl
y.
Refer to the instruction manual
for the tightening torque.
Use the new AC input terminal block cover
attached to the new cable.
Connect to AC input
ternminals by screws
●
Securely fasten the screws with a tightening
Tighten
the screw
5.0 to 8.0mm
2
5.5mm
1.355Nm (12lb-in)
Tightening torque
8mm (AWG8)
2
Connectable wire size
Amount of stripped wire
Recommended cable size
torque of 1.355Nm (12 lb-in) or more.
5
. Fasten the AC input terminal block cover to the console with screws (2 screws).
BN220T
Use Copper Conductor Onl
y.
Refer to the instruction manual
for the tightening torque.
Tighten the screw
Summary of Contents for BN100T
