Omron BN100T, Instruction Manual, Page: 39 / 110

3 Check and start operation
3-1 The name and function for the operation and display
BN50T/BN75T/BN100T/BN150T/BN220T/BN300T
3-2
3-1-3 Switch
Sign
of the
figure Label Name Description
E Power switch ON: Press and hold the power switch of the UPS for 2 seconds or
longer. After a few seconds, the power output from the UPS
begins.
OFF: Press and hold the power switch of the UPS for 2 seconds or
longer in ON state, then the power output from the UPS stops.
Additional Information:
 If the AC input plug is connected to the wall outlet (commercial power
source), then the battery will be charged regardless of the power
switch.
F “Up” switch Move cursor up or increase a value
G “Down” switch Move cursor down or decrease a value
H “ESC” switch Return to menu or cancel
Stop the beeper by pressing for 0.5 seconds or longer
I “Enter” switch Select the menu item or set the value
3 Check and start operation
3-1 The name and function for the operation and display
BN50T/BN75T/BN100T/BN150T/BN220T/BN300T
3-3
3
3-1-4 Beep sound

Type of beep sound.

Intermittent
0.5-second
intervals:
ON
OFF
0.5second
2-second
intervals:
2 second
ON
OFF
1-second
intervals:
1 second
ON
OFF
4-second
intervals:
4second
ON
OFF

Continuous
Continuous
ON
OFF
Additional Information
• You can set the conditions on which the beep sounds to ”OFF at Battery Mode”
or “OFF at Anytime”, with “Setting” - “Local Setting” - “Audible Alarm” in the menu
on the LCD.

Stopping the beep sound
When the beep is sounding, you can stop it by pressing and holding the “ESC” switch for
0.5 seconds or longer.