4.3.2 Mounting instructions for temporary mounting using the 1/4"
BSW thread
Screw the grub screw of the stand into the 1/4" BSW
(British Standard Whitworth) thread (1) on the base
plate of
OTMC 100
and tighten it sufficiently.
The threaded hole in the base plate is 6.5 mm deep.
Make sure not to screw in the grub screw too deep.
Assemble the delivered waterproof RJ45 connector
to the Ethernet cable according to the accompanying
assembly instructions and insert it to the RJ45
connector on the base plate of
OTMC 100
. If
necessary, use suitable cable ties to fasten the
Ethernet network cable to the stand.
1
Do not move
OTMC 100
during operation. Changing the position of
OTMC 100
during
operation causes time errors.
Mounting
OMICRON
19
