Olympus USG-400, Maintenance Manual

Page: 26 / 90

USG-400
Installation and Connection 3-12 ISSUE1
CAUTION
Before connecting the power supply, make sure that it
conforms to the power specifications described on the rating
plate of the ultrasonic generator.
1.
Connecting the power cord
Connect the power cord of the ultrasonic generator to the AC power socket
on the rear panel of the ultrasonic generator (see Figure 3.12).
2.
Connecting to the power outlet
Connect the power cord directly to a hospital-grade 3-conductor power
outlet that meets the electrical rating inscribed on the rating plate of the
ultrasonic generator (see Figure 3.12).
Figure 3.12
5 Automatic mist & smoke evacuation
system/function (When using the compatible
high flow insufflation unit)
When the THUNDERBEAT or SONICBEAT is activated, automatic mist & smoke evacuation system/function of
UHI-2/3 work with activation simultaneously to evacuate the smoke and mist produced in the abdominal cavity.
CAUTION
When using the automatic mist & smoke evacuation
system/function, also refer to the instruction manual for the
compatible high flow insufflation unit.
Avoid applying excessive force to the communication cable.
Otherwise, wire disconnection or other failure may result.
The 2-way cable for aeration and extension cable for aeration
are not allowed to use for the ultrasonic generator.
When using the ultrasonic generator with the compatible
electrosurgical generator and the compatible high flow
insufflation unit simultaneously, contact Olympus.