Olivetti OFX 1200, Instruction Manual

Page: 84 / 153

TRANSMISSION
77
2.
Press the relevant one touch key, e.g. key
07
.
The display will show the number memorised for the
07
key.
IF...
•
a name has also been stored, this will appear on the display.
•
a number has not been entered for this key, a message will be
displayed to this effect.
3.
The machine will automatically start to transmit the document. On
completion of the transmission, the message “TX COMPLETED”
will appear for a few seconds followed by the initial operating
mode display.
IF...
•
the transmission report function is selected (see section:
REPORTS
), the machine will print out a report advising you of
the status of the transmission.
•
if you want to interrupt transmission at any point:
1) Press
STOP.
The display alternately indicates the machine
operation mode message and a message prompting you to
press
STOP
to remove the document (REMOVE
DOCUMENT, PRESS
STOP
).
2) Press
STOP
again. The document will be ejected and the
display will alternate between the machine operation mode
message and a message indicating that the transmission
has been interrupted. If the document to be removed
comprises more than one sheet, manually remove
all
the
sheets above the one in the ADF and then press
STOP
to
also eject the first sheet.
3) Press
STOP
again to return to the original operation mode.
HOW TO TRANSMIT A DOCUMENT USING THE SPEED DIAL CODES
You may also use the speed dial function to send a fax.
When you insert a document in the document feeder, the fax machine waits for you dial the fax number.
At this point, all you have to do is:
•
Press the
SPEED DIAL
key and enter the programmed 2-digit code.
v
The display shows the initial operating mode.
☞
FAX CALL
345678907861
CONNECTING
ê
NORMAL
AUTOMATIC RX
09-03-95 16:20