Olivetti OFX 1200, Instruction Manual, Page: 56 / 153

INSTALLATION PARAMETERS
47
7.
Confirm your selection by pressing
START.
The display will now prompt you to enter the prefix.
8.
Enter the prefix (max 3 digits) from the numeric keypad and press
START.
The display now shows the first of the two public line dialling
mode parameters (tone or pulse). In this example we choose
tone dialling.
To select one of the two options press
>
or
<
.
9.
Press
START.
The display proposes the remote start parameter (ON or OFF)
(refer to the relative part of the section
RECEPTION
). In this
example we choose ON.
To select one of these two options press
>
or
<
.
IF..
•
you selected OFF, pass directly to step
11
.
10.
Press
START
.
The display shows the message prompting you to input the multi-
frequency code that you wish to use for the remote start function
(a digit between 0 and 9 and the character * ).
11.
Enter the code of your choice and press
START.
The display proposes the parameter for the number of rings (1, 2,
4, 8) emitted by the fax machine on reception of a document. In
our example we choose 1 ring.
To select the desired option press
>
or
<
.
IF...
•
this option is not displayed, it is because it is not available in
the country in which the fax machine is to be used.
12.
Press
START.
The display now proposes the parameter relative to the pause
time that the fax must use before presetting for document
reception. This is related to the PHONE/FAX reception mode.
During this interval the fax emits an intermittent acoustic signal. In
the example we choose 15 seconds.
To select the desired option press
>
or
<
.
IF...
•
this option is not displayed, it is because it is not available in
the country in which the machine is to be used.
☞
TYPE PREFIX
(0-9): 0
PSTN DIAL: TONE
START/STOP/
ß
/
à
REMOTE START: ON
START/STOP/
ß
/
à
TYPE CODE
CODE (0-9, * ) **
RING COUNT: 01
START/STOP/
ß
/
à
FAX/TEL TIMER:15
START/STOP/
ß
/
à