Olivetti d-Copia 4200MF, Manual

Page: 32 / 219

FAX Operation (Basic)
3-4 OPERATION GUIDE
Automatic Send
General transmission using the numeric keys is explained.
NOTE:
To send an Internet FAX (i-FAX), refer to i-FAX Transmission on page 8-7 .
Switching to the Send Screen
1
Check that the basic send screen is displayed.
If the basic send screen is not displayed, press the
Send/FAX key.
The screen for sending appears.
NOTE:
Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the basic screen for sending.
Selection of Transmission Method
2
There are two transmission methods - memory
transmission and direct transmission. The default is
memory transmission.
To select direct transmission, use the following
procedure.
1 Press [Advanced Setup], and then [FAX Direct
Transmission].
2 Press [On].
3 Press [OK].
Status 08/08/2009 10:10
Original/Sending
Data Format
Quick Setup Destination Image Quality Advanced
Setup
Destination Detail
A OFFICE 1234567890
Address
Book
Folder Path
Entry
E-mail
Addr Entry
No.
1/100
AAA BBB CCC DDD EEE
FFF GGG HHH III JJJ
0004 0003 0005 0001 0002
0006 0007 0008 0009 0010
1/1
i-FAX
Addr Entry
FAX No.
Entry
WSD Scan
Place original.
Ready to send.
Destination
B OFFICE 1234568907
C OFFICE 1234569078
Direct Delete Recall On Hook Chain Detail/Edit
Setting for Direct
transmission
Description
Off Starts memory transmission.
After originals are scanned into memory, the communication starts.