Olivetti d-COPIA 3013MF Page 61 Operation Manual Download

Page: 61 / 483

Preparation before Use

2-25

Uninstalling the Software

Perform the following procedure to delete the Software from your computer.

NOTE:

Uninstallation on Windows must be done by a user logged on with administrator privileges.

Click [Start] button on the Windows and then select [All
Programs], [

Olivetti

], and [Uninstall Product Library]

to display the Uninstall Wizard.

Place a check in the check box of the software to be
deleted.

Click

Uninstall

If a system restart message appears, restart the
computer by following the screen prompts. This
completes the software uninstallation procedure.

NOTE:

The software can also be uninstalled using the

Product Library.
In the Product Library installation screen, click [Uninstall],
and follow the on-screen instructions to uninstall the
software.

Summary of Contents for d-COPIA 3013MF




































































































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA 3013MF

Reviews:

Related manuals for d-COPIA 3013MF

Brands by name

Popular brands

Olivetti d-COPIA 3013MF, Operation Manual

Search results

Summary of Contents for d-COPIA 3013MF

Reviews:

Related manuals for d-COPIA 3013MF

Brands by name

Popular brands