Olivetti d-COPIA 3013MF Page 249 Operation Manual Download

Page: 249 / 483

8-41

Default Setting (System Menu)

The Timer Settings menu appears.

Press the





key to select [Auto Panel Reset].

Press the

key. Auto Panel Reset appears.

Press the





key to select [Off] or [On].

Press the

key.

Completed.

is displayed and the

screen returns to the Timer Settings menu.

Panel Reset Timer

If you select [On] for

Auto Panel Reset

, set the amount of time to wait before

Auto Panel Reset

. Options are between

5 and 495 seconds (every five seconds). The default setting is

seconds.

NOTE:

If you select [Off] for

Auto Panel Reset

, the time display does not appear.

Use the procedure below to set the reset time.

In the Sys. Menu/Count. menu, press the





key to

select [Common Settings].

Press the

key. The Common Settings menu appears.

Press the





key to select [Timer Setting], and press

the

key.

Timer Setting:

*********************

PanelReset Timer

Low Power Timer

[ Exit

]

Auto Panel Reset

Auto Panel Reset:

Off

*********************

*On

Sys. Menu/Count.:

System/Network

User/Job Account

*********************

[ Exit

]

Common Settings

Common Settings:

*********************

Default Screen

Sound

[ Exit

]

Language

Summary of Contents for d-COPIA 3013MF




































































































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA 3013MF

Reviews:

Related manuals for d-COPIA 3013MF

Brands by name

Popular brands

Olivetti d-COPIA 3013MF, Operation Manual

Search results

Summary of Contents for d-COPIA 3013MF

Reviews:

Related manuals for d-COPIA 3013MF

Brands by name

Popular brands