Oliver LEGACY ELITE 2022, Manual

Page: 345 / 410

345
XANTREX FREEDOM XC PRO INVERTER
Product Safety Information
975-0799-01-01 vii
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, BURN, OR
ARC FLASH
n
Apply appropriate personal protective equipment (PPE)
and follow safe electrical work practices. See NFPA 70E
or CSA Z462.
n
This equipment must only be installed and serviced by
qualified electrical personnel.
n
Never operate energized with the wiring compartment
cover removed.
n
Energized from multiple sources. Before removing the
wiring compartment cover - identify all sources, de-
energize, and wait 2 min for circuits to discharge.
n
Always use a properly rated voltage sensing device to
confirm all circuits are de-energized.
n
Replace all devices, doors, and covers before turning on
power to this equipment.
Failure to follow these instructions will result in death or serious
injury.
WARNING
FIRE AND EXPLOSION HAZARD
n
Unit’s components may produce arcs or sparks.
n
Do not install near batteries, in machinery space, or in an
area in which ignition-protected equipment is required.
Failure to follow these instructions can result in death, serious
injury, or equipment damage .
Areas include any space containing gasoline-powered machinery,
fuel tanks, as well as joints, fittings, or other connections between
components of the fuel system.
WARNING
ELECTRICAL SHOCK HAZARD
n
Replace the wiring compartment cover before turning on
power to this equipment.
n
Use a torque screwdriver to tighten the captive nut panel
screw to 5 in-lb torque to ensure a proper ground
connection and a required tool access to the wiring
compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage .
Precautions When Working With Batteries
975-0799-01-01 ix
CAUTION
PHYSICAL INJURY HAZARD
This Freedom XC PRO Inverter/Charger is not intended for use by
persons (including children) with reduced physical, sensory, or
mental capabilities or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the
appliance.
Failure to follow these instructions can result in injury or
equipment damage.
Precautions When Working With
Batteries
IMPORTANT : Battery work and maintenance must be done by
qualified personnel knowledgeable about batteries to ensure
compliance with battery handling and maintenance safety
precautions.
WARNING
BURN FROM HIGH SHORT-CIRCUIT CURRENT, FIRE
AND EXPLOSION FROM VENTED GASES HAZARDS
l
Always wear proper, non-absorbent gloves, complete eye
protection, and clothing protection. Avoid touching your
eyes and wiping your forehead while working near
batteries. See note #4.
l
Remove all personal metal items, like rings, bracelets, and
watches when working with batteries. See notes #5 and #6
below.
l
Never smoke or allow a spark or flame near the engine or
batteries.
l
Never charge a frozen battery.
l
Never charge a Lithium Ion type battery with an ambient of
0 °C (-32 °F) or colder.
Failure to follow these instructions can result in death, serious
injury, or equipment damage .