Oliver LEGACY ELITE 2022, Manual

Page: 141 / 410

141
CRADLEPOINT WIRELESS WAN
©2017 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com 104
User Manual / IBR900/IBR950 1/5/17
For modems supporting manual
carrier switching (such as LPE), select
File to browse to an appropriate,
different modem firmware package
file to load into the modem’s
memory.
Firmware updates can be performed
on any firmware line item using
the Check/Upgrade or File (manual)
process.
The following actions are available to
be configured:
• Automatically check for new firmware: Click the checkbox to indicate whether the system is to
automatically check for available modem firmware updates. When enabled, the system checks once a day.
This global setting applies to all modems connected to the router.
• Select Modem: Select the appropriate modem which you would like to update. Note that dual SIM devices
are listed as a single modem.
In the Installed Firmware grid, you will see the following columns:
• Active (Multi-firmware modems only): Indicates which carrier package is currently active on the modem.
Note: You cannot select the active image. On multi-firmware modems, the carrier firmware is selected
automatically.
• Carrier: Displays the carrier supported by the modem firmware. For carriers not otherwise available,
“Generic” will be displayed.
• Current Package Version: Displays the current firmware package version loaded on the modem.
• Available Firmware Version: Displays the firmware version available for upgrade or indicates status of the
current firmware. If new firmware is available, the available upgrade version is displayed.
• Upgrade: Click this button to download the Available Firmware Version file and perform this over-the-air
upgrade. If a connection error occurs, it is possible that HTTPS is blocked for the upgrade check. Enable Allow
HTTP Firmware Check in
SYSTEM > System Control >System Firmware to address this issue.
• Check: Click this button to refresh or update the Available Firmware Version status column.
• File: Click this button to manually upload a modem firmware file. Type the path/file or click Select Firmware
File to browse to the local file location. Once entered, click Begin Firmware Upgrade. Note: For modems which
support manual carrier switching, find the appropriate modem firmware package file via ECM or the Cradlepoint
portal.