Oliver LEGACY ELITE 2022, Manual

Page: 52 / 410

52
CRADLEPOINT WIRELESS WAN
©2017 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com 15
User Manual / IBR900/IBR950 1/5/17
QUICK START
BASIC SETUP
1. Insert an activated SIM
A wireless broadband data plan must be added to your Cradlepoint IBR900. Wireless broadband data plans are
available from wireless carriers such as Verizon, AT&T, Sprint, EE, and Vodafone. The SIM must be provisioned
with the carrier. Contact your carrier for details about selecting a data plan and about the process for
provisioning your SIM.
Once you have an activated SIM, insert it into the integrated modem. Insert the SIM card into the slot marked
SIM 1 (use the other slot, SIM 2 , for a secondary/backup SIM).
To insert or remove SIM card:
1. Remove dual SIM cover.
2.
Insert SIM card notch-end first with metal contacts down.
3. Replace dual SIM cover.
Note: Device will not power on without cover in place.
2. Attach the WiFi and modem antennas
Attach the three WiFi antennas (included) and two modem antennas to the connectors. Antennas are jointed,
which enables you to position them for optimal signal. To attach, hold the antenna straight and twist the base
of the antenna to connect, folding the joint if needed.
NOTE: Ensure that the router antennas are not near metal
or other RF reflective surfaces.
3. Connect to power source
Wire power cable to 9-33 V power source. (AC power supply sold separately.)
ACCESSING THE ADMINISTRATION PAGES
Once you are connected, open the Cradlepoint IBR900’s GUI-based
administration pages to make configuration changes to your router.
1. Open a browser window and type “ cp/ ” or “ 192.168.0.1 ” in the
address bar. Press ENTER/RETURN .
2. When prompted for your password, type the eight character
DEFAULT PASSWORD found on the product label.
NOTE: The product label shown is an example only: your DEFAULT
PASSWORD and SSID will be unique.
It’s possible – and more efficient – to do all your configuration
changes through Cradlepoint Enterprise Cloud Manager (ECM) without
logging into the local administration pages. Set up a group of routers
and set the configuration for all of them at once. See below for more
information about ECM.