Oliver LEGACY ELITE 2022, Manual

Page: 128 / 410

128
CRADLEPOINT WIRELESS WAN
©2017 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com 91
User Manual / IBR900/IBR950 1/5/17
• Reboot Count – Track number of router reboots.
• Enable Login Banner – Add the CLI banner to the
router’s login page.
• Local Domain – The local domain is used as the
suffix for DNS entries of local hosts. This is tied to
the hostnames of DHCP clients as DHCP_HOSTNAME.
LOCAL_DOMAIN.
• System Identifier – This is a customizable identity
that will be used in router reporting and alerting. The
default value is the product name and the last three
characters of the MAC address of the router.
• Asset Identifier – This is a customizable string that
will be used in router reporting and alerting.
• Require HTTPS Connection – Check this box if
you want to encrypt all router administration
communication.
• Secure HTTPS Port – Enter the port number you want
to use. The default is 443.
• Enable SSH Server – When the router’s SSH server is enabled you may access the router’s command line
interface (CLI) using the standards-based SSH protocol. Use the username “admin” and the standard system
password to log in.
• SSH Server Port – Default: 22.
• Automatically Set System Identifier – This will automatically set the system ID to the name of the first
client that gets a DHCP lease. This feature cannot be used with email alerts but alerts can be sent to ECM.
GPS
If you have an attached device with GPS support, you can enable a
graphical view of your router’s location, which appears in
STATUS > GPS .
You can also enable GPS NMEA format sentence reporting to a server (LAN,
WAN, or remote). This GPS reporting functionality requires a separate
software client to listen/query for these sentences. SIM-based models
with GPS support require that the SIM be inserted. Some carriers disable
GPS support in otherwise supported modems. If you encounter issues with
obtaining a fix, contact your carrier and ensure that GPS is supported.
GENERAL SETTINGS
Enable GPS – Enable support for querying GPS information from capable
modems.
Enable GPS Lock LED – Use the USB LED to show if the GPS has received
a fix. It will blink red if no fix is available or be solid green if a fix is
available.
Enable GPS Keepalive – Poll the GPS every 10 seconds to keep hardware
from sleeping.
TAIP Vehicle ID – Used for vehicle identification when using the TAIP
protocol. Typically, a GPS fleet tracking application will use this identifier
to identify TAIP messages as being sent from some unique vehicle.
GPS CLIENTS, SERVERS, AND SERIAL
GPS reporting requires separate software to listen/query for NMEA (or
TAIP) sentences. The router must either act as a GPS server (which