Oliver LEGACY ELITE 2022, Manual

Page: 214 / 410

214
LIFELINE AGM BATTERIES
Document No. 6-0101 Rev. F Page 18 of 40
Figure 5-8. Series/Parallel Connection for 4-Terminal Batteries (Low or High Rate Applications)
5.3 Discharging
Discharge data for Lifeline® AGM batteries are given in Appendix C. The capacity delivered by
the battery depends on the rate of discharge as well as the battery temperature. The battery will
deliver less capacity as the discharge rate increases and less capacity as the temperature is
lowered. Graphs are provided in Appendix C to quantify these effects. Peukert plots (Amps vs
Time) are also included, along with formulas for calculating the current that can be removed or
any discharge time from 0.5 hours to 120 hours. To calculate the discharge time for a specified
amperage, these formulas can be inverted as follows:
A = C x T
-n
T = C
1/n
x A
-1/n
(A = Amps, T = Time in hours, C & n are constants specific for each battery model)
In general, batteries should be sized such that the rated capacity is at least twice the capacity
required by the load. For example, if 100 Ah is required on average, select at least a 200Ah
battery. This approach will limit the average depth of discharge to 50% and will dramatically
extend the life of the battery (see chart of Cycle Life versus Depth of Discharge in Appendix C).