Oliver LEGACY ELITE 2022, Manual

Page: 161 / 410

161
Page 9 © 2017 Nature’s Head. Inc.
INSTALLATION: Venting
Attaching the Handle
The toilet is shipped with the agitator handle unattached and must be
installed before use. The standard handle is attached with a collar and
hairpin clip, while the spider handle attaches with an allen set screw
and locknut. In the event that the handle must be moved to the opposite
site of the base, the agitator must be manually removed, reversed, and
reinstalled. A Video showing how to reverse the agitators can be found
on NaturesHead.net/Installation
Reversing the Fan and Filter Housing
If installation of the ventilating hose is more favorable on one side of
�����������������������������������������������������������������������
��������������������������������������������������������������������
the components and their respective housings. A Video showing how
��������������������������������������������������������������������
Installation.
���������������
Page 10 © 2017 Nature’s Head. Inc.
INSTALLATION: Venting, continued
If a sharp 90 degree turn from the
fan housing is needed, a 1¼ inch
PVC street elbow (not provided)
may be used to achieve a proper
��������������
Installations on boats and RV’s are
easily managed with the stainless
steel mushroom vent with the built-
in screen and adjustable top which
is self-sealing.
����������������������������������������������������������������������
�����������������������������������������������������������������������
����������������������������������������������������������������
the mushroom vent mounted over the existing hole. The venting hose
provided with the unit will attach directly to the adapter.
Clamping the hose to the fan housing is not necessary on the connection
for the head, and normally not necessary on the exterior connecter. With
�������������������������������������������������������������������
depending on the amount of support provided for the vent hose. If the
hose is supported properly, you will probably not need a clamp. The vent
hose must be attached to the housing which has the fan inside it. The unit
is designed to pull fresh air through the head and ventilate it outside. If
you disassemble the fan housing, always check to be certain that the fan
is blowing out of the vent before re-attaching the vent hose.
Attaching a mesh fabric or screen (not provided) over the opening is
necessary to prevent the entry of insects into the system. Any mesh fabric
such as window screen or nylon netting will provide an adequate insect
barrier.
NATURE’S HEAD COMPOSTING TOILET