Oliver LEGACY ELITE 2022, Manual

Page: 159 / 410

159
Page 7 © 2017 Nature’s Head. Inc.
INSTALLATION: Mounting
It is necessary to secure your toilet to
�����������������������������������
The normal mounting is to position
the L-brackets under the base in the
recesses in the toilet, as shown on the
left. Counter sunk mounting screws
are included for installing to a wood
������
����������������������������������������������������������������������������
previously selected location. Attach the L-brackets to the toilet with the
knobs provided. If you choose to mount the L-brackets facing out (not
�������������������������������������������������������������������������
a pencil for drill locations. If you choose to mount them under the toilet,
carefully trace around as much of the outline of the bracket as possible.
Measure the distance between the bracket and the lines you drew.
Now remove the brackets from the toilet and move the toilet out of the
way. Carefully position the L-brackets inside of the lines that you drew
���������������������������������������������������������������������������
walls, be sure you know what is behind them! The holes in the brackets
are for #12 countersunk bolts or screws. If you are using the screws
provided you will need to drill a 1/8 inch pilot hole in the drill marks you
������������������
If you are uncertain if your brackets are positioned correctly, drill and
mount just one bracket. Then reposition the toilet and mount to the one
attached bracket. Check the positioning of your other bracket and marks.
If all looks good, proceed with drilling and mounting the other bracket.
If your markings are off, adjust your lines and proceed with mounting
�����������������������������������������������������������������������
frequently, a small amount of sealant should be placed in the holes before
installing your screws. Attach your toilet and check to be sure everything
�������������������������������
Do not over tighten the hold down knobs as you will
damage the threads in the base!
Page 8 © 2017 Nature’s Head. Inc.
INSTALLATION: Venting
The unit must be vented to the outside of your cabin whether it is a
boat, RV, truck, or vacation property. This helps keep your bathroom
�������������������������������������������������������������������������
facilitates the composting process.
�����������������������������������������������������������������������
installation. The average do-it-yourselfer should be able to easily
accomplish this if one is familiar with and has the proper tools.
Depending on the type and placement of your vent, you may be required
�����������������������������������������������������������������������������
��������������������������������������������������������������������������
handyman to do this for you.
Due to the variety of ventilation choices
available, the external vent has not been
provided. Mushroom vents, solar vents, and
our PVC Vent Assembly Kit are commonly
used for venting to the exterior. All of these
can be purchased from Nature’s Head.
The unit may be vented vertically through the
roof, or most common horizontally through
������������������������������������������������������������������������
and other permanent structures the venting can be placed horizontally
through the wall with our PVC Vent Kit.
�������������������������������������������
is used beneath a mushroom vent or solar
vent and connects directly to the hose.
NATURE’S HEAD COMPOSTING TOILET