Page: 40
Service Guide ML320/ML321
Chapter 3 Maintenance & Disassembly
3.2
DISASSEMBLY/ASSEMBLY PROCEDURES
General Information
This section contains the printer disassembly procedures. Only the removal procedures are explained.
Reverse the procedure for the installation.
At the bottom of each procedure is a listing of the parts covered in that procedure. The Okidata part
number, item description, applicable product, comment (RSPL, Option, Consumable), serial number
revision level, and the cross-reference(s) to Appendix B are provided for each part. Items included in
the Recommended Spare Parts List are indicated by the acronym RSPL. N/A appears where a part
number is not available.
Part
Item
Product
Comment
Revision
App. B
Number
Description
Reference
This Service Handbook lists the disassembly procedures for major components of the unit. Okidata
does NOT recommend disassembling a unit which is operating normally. If you decide to perform
disassembly during this training, Okidata recommends that you perform only the disassembly
procedures for RSPL items. All other procedures are provided to assist you in identifying parts.
It is not likely that you will perform these procedures while servicing the product.
Be sure to read all notes, cautions, and warnings, as they contain important information regarding
assembly/disassembly.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)