CAUTION:
Installation
If the line feed motor assembly is not correctly installed, excessive wear of the platen
gears will occur.
Verify that the tabs are not bent. If the tabs are bent, straighten them. The assembly
will not seat if the tabs are bent. If the assembly is not seated correctly, the gears will
not correctly align.
Rotate the bias gear towards the front of the printer as far as the gear will turn. This
aligns the bias gear with the platen gear.
Set the platen assembly in place, securely engaging the idler gear with the platen gears.
Lock the line feed motor assembly into position. Verify that the tabs are not bent.
