OKIDATA ML320 Turbo, Service Manual

Page: 78 / 294

Before installing the cover, move the bail arm lever towards the back of the printer and move
the release lever towards the front of the printer.
After installation, verify that the cover is correctly seated in the front slots. The cover will
warp if it is incorrectly installed. Check that the paper bail moves properly.
When cleaning, refer to Section 3.4( ) of this Service Handbook.
Part
Number Item
Description
Product Comment Revision
App. B
Reference
P/N
51901101 Knob: Platen Both RSPL A B C D B.2.03 04 05
P/N
50060701 Cover: Access
(Assembly) 320 RSPL A B C D B.2.01 02
P/N
50060801 Cover: Access
(Assembly) 321 RSPL A B C D B.2.01 02
P/N
50060901 Separator: Sheet
(Assembly) 320 RSPL A B C D B.2.01 02
P/N
50061001 Separator: Sheet
(Assembly) 321 RSPL A B C D B.2.01 02
P/N
53488501 Frame: Rear Cover 320 RSPL A B C D B.2.01 02
P/N
53488601 Frame: Rear Cover 321 RSPL A B C D B.2.01 02
P/N
53488302 Cover: Middle 320 RSPL A B C B.2.01
P/N
53488402 Cover: Middle 321 RSPL A B C B.2.01
P/N
53070801 Cover: Middle (SSD) 321 RSPL D B.2.02
P/N
53070701 Cover: Middle (SSD) 320 RSPL D B.2.02