Page: 42
Service Guide ML320/ML321
Chapter 3 Maintenance & Disassembly
3.2.02 Separator Assembly
CAUTION:
To avoid damaging the ribbon protector, slide the printhead towards the center of
the printer before removing the separator assembly.
Perform these procedures first:
- 3.2.01 (
)
- Open the access cover (1).
- Move the paper bail lever (2) toward the front of the printer.
- While pressing the release latches (3), tilt the separator assembly (4) toward the
rear of the printer to release it from the platen shaft (5).
- Remove the separator assembly.