Page: 44
Service Guide ML320/ML321
Chapter 3 Maintenance & Disassembly
3.2.04 Upper Cover Assembly
Perform these procedures first:
- 3.2.01 (
)
-
Wrap a rubber band around the wire extensions of the interface connector.
This pulls the extensions in and avoids damage when the cover is removed. (Notshown).
- Detach the platen knob (1).
- Insert a flat-blade screwdriver through the slots (2) and disengage the claws of the cover.
The Microline 320 has three slots. The Microline 321 has five slots.
- Lift the front of the upper cover assembly (3) and remove the assembly.
- The upper cover assembly contains the access cover assembly (4), the sheet separator
assembly (5), the rear cover (6), and the middle cover (7)
